Skamol V-1100 Plain Vermiculite Board
Press and move to zoom
Move over image to zoom

Skamol V-1100 Plain Vermiculite Board

30mm x 610mm x 1000mm Skamol V-1100 475 Plain Vermiculite Board
Product Code: SGI-375-0020

Skamol V-1100 is a high temperature, energy-saving and cost effective insulating board that has been designed for a maximum service temperature of 2012oF (1100oC). These boards are clean to handle and easy to install, and the product composition allows for easy cutting and shaping using ordinary-wood working tools.

Skamol V-1100 is suitable for hot-face or back up insulation of all refractory constructions. It will not decompose even when subjected to direct flame, but the maximum service temperature should be taken into consideration.

Typical Properties   Typical Chemical Analysis %
Maximum Service Temperature  1100oC (2012oF)    SiO2  46
Bulk Density, Dry  475 kg/m3 (30 lbs/ft3)    TiO2  0.7
Cold Crushing Strength  2.5 MPa (323 lbs/in2)    Fe2O3  5.5
Modulus of Rupture  0.8 MPa (116 lbs/in2)    Al2O3  7.0
Linear Reheat Shrinkage  1.0%    MgO  19.0
Total Porosity  81%    CaO  3.5
Specific Heat  0.94 KJ/(kgxK) (0.22 BTU/(lbxoF))    Na2O  0.2
Co-Efficient of Reversible Thermal Expansion @ 20-750oC (68-1382oF)
 11.0 x10-6 K-1 (6.1 x10-6 oF-1)    K2O  10.0
Resistance to Thermal Shock  > 30 Cycles    LOI  7.0
Pyrometric Cone Equivalent  1300oC (2372oF)      

Material Safety Data Sheet

Skamol - Vermiculite Board Insulation.pdf

Technical Data Sheet

Skamol - V-1100-475-UK.pdf